Factory Directly Supply Foam Lamination Hot Melt Adhesives PUR-1700F with Innovative Design Hot
Wanli® PUR hot melt adhesive PUR-1700F for textile lamination
bonding is a single-component reactive PUR hot melt adhesive with
100% solid content. PUR-1700F can be used for fabric and film,
fabric and fabric, fabric and sponge lamination, leather products
and fabric lamination, especially suitable for roller coating
process. PUR-1700F is featured stable viscosity under heating at a
certain temperature, high initial bonding strength and final
bonding strength. After curing, PUR-1700F has good peeling
strength, good heat&humidity resistance and chemical
resistance, .
APPLICATION
Wanli® PUR hot melt adhesive PUR-1700F is used for lamination
bonding of textiles. PUR-1700F can be used for lamination of fabric
and film, fabric and fabric, fabric and sponge, lamination of
leather products and fabric, and is especially suitable for roll
coating process.
| Application Material | Fabric to Sponge Lamination Bonding |
| Appearance | Light Yellow Transparent Viscous Liquid |
| Component | PUR (Polyurethane) |
| Application Industry | Textile Lamination Bonding |
| Solid Content | 100% |
| Operating Temperature | 105～115 ℃ |
| Melt Viscosity | About 4500mPa·s @110℃(Brookfield-ASTMD3236) |
| Usage Scope | Fabric to Sponge Bonding |
| Shelf Life | 6 Months |
| Package | 2Kg/Bag, 20Kg/Barrel, 200Kg/Barrel |
FEATURE
PUR-1700F has stable viscosity when heated at a certain
temperature.
High initial and final bonding strength.
After curing, PUR-1700F has good peel strength, good heat &
moisture resistance and chemical resistance.
USER GUIDE
The package of PUR-1700F is suitable for various dispensing
equipment.
The recommended operating temperature is 105℃~115℃.
In order to achieve complete curing, it is better to place finished
product in a working environment with suitable temperature and
humidity (recommended temperature: 23~25℃, about 65% relative
humidity).
STORAGE
Store PUR-1700F where it’s dry, cool and avoid direct sunlight. The
storage temperature should be no more than 35℃ and avoid open fire
or heat source.
