Hot Sale High Quality Viscosity 9000~12000cps@130℃(Brookfield-ASTM
D3236) Milky White Solid WANLI® PUR-9002S Reactive Hot Melt
Adhesive for PVC / PET Films to Galvanized Sheet / MDF Board /
Wood-Plastic Board / Solid Wood Board Flat Lamination Bonding
Application
Wanli® PUR hot melt adhesive PUR-9002S for woodworking flat
lamination bonding is a single-component reactive PUR hot melt
adhesive with 100% solid content. PUR-9002S can be used for the lamination of PVC films/PET films to galvanized
sheet/MDF board/wood-plastic board/solid wood board and lamination
of other kinds of plates to films. PUR-9002S is featured stable viscosity under heating at a certain
temperature, high initial bonding strength and final bonding
strength. After curing, PUR-9002S has good peeling strength, good heat&humidity resistance and
chemical resistance.
APPLICATION
Wanli® PUR hot melt adhesive PUR-9002S is used for woodworking flat
lamination bonding. PUR-9002S can be used for the lamination of PVC films/PET films to galvanized
sheet/MDF board/wood-plastic board/solid wood board and lamination
of other kinds of plates to films.
| Application Material | Decorative Panels Lamination Bonding |
| Appearance | Milky Solid |
| Component | PUR (Polyurethane) |
| Application Industry | Woodworking Flat Lamination Bonding |
| Solid Content | 100 Percent |
| Operating Temperature | 130℃～150℃ |
| Melt Viscosity | 5500~7500mPa·s@140℃ And 9000~12000mPa·s@130℃(Brookfield-ASTM D3236) |
| Open Time | 3-4 Minutes @ 25℃ |
| Usage Scope | Flat Lamination Bonding of All Kinds of Films to All Kinds of
Boards |
| Shelf Life | Half One Year |
| Package | 310ml/Aluminum Tube, 20Kg/Barrel, 200Kg/Barrel |
FEATURE
Stable viscosity under heating at a certain temperature.
High initial bonding strength and final bonding strength.
PUR-9002S has good peeling strength, good heat&humidity resistance and
chemical resistance after curing.
USER GUIDE
The package of PUR-9002S is suitable for various dispensing
equipment.
The recommended operating temperature is 130℃~150℃.
In order to achieve complete curing, it is better to place finished
product in a working environment with suitable temperature and
humidity (recommended temperature: 23~25 ℃, about 65% relative
humidity).
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight.
The storage temperature should be no more than 35℃ and avoid open
fire or heat source.
